Simon Duff Enfineering Ltd

 

CLASSIC MOTORCYCLE PARTS

BIRCHILL CROSS, CHARDSTOCK; AXMINSTER, DEVON, EX137LB
Tel: 01460 220731  Email: simonduffeng@btconnect.com

 

HomeAbout Us2nd User ATV'sNew ATV'sBike PartsMassey Ferguson Cab's

 

 

Workshop clearance of all sorts of  classic motorcycle parts.  This page will be amended as more bits are unearthed. Please look again.

Please note that these items are for sale privately and are not trade sales.

Last updated  March 2016

Please email me with any requirements you have or queries

simonduffeng@btconnect.com

Picture

Description Price in Shipping in

8.  Steel hub assembly, 7", no bearings or shaft   10   8.50

10.  Norton hub, alloy  8", no bearings or shaft   10   8.50

11. Ariel Red Hunter Cylinder Head, Iron.  Thought to be 350   20   11.50

12.   Norton crankcase, 500 single  79 x 100,  stamped 94350 with a 4 beneath   50   11.50
  13.   Norton crankcase, single, stamped 83/113  71940 M9.  With studs   50  11.50
14.  AJS Model 18 Primary Chaincase rubber seal and clamping ring.  New, unused.  Miscellaneous paper gasket as well, could be from AMC gearbox.   20   4
Image to come 16.  Velocette MAC engine   350   25
17.   Handlebar  26" wide about 2" set   3   5
18.   Handlebar levers, pair of, chrome, ball ended, slight rust.   5   4
19.  Lockheed type brake lever and mastercylinder, no seals   10   4
Photo to come 21.    BSA Lightweight rigid frame, no forks but some engine plates   75   25
 22.  Selection of sprockets Norton/AMC   10   7.50
23.  Norton Roadholder springs   2   4
26.   Triumph timing case cover   10   5
29.  Various jets, carb slide, needle, oring, filter gauze, spanner,  etc   20   3
32.  Norton brake drum, made in 2 parts, cast iron drum., no bearings   10   9.50
33.  Norton brake backplate, 7" alloy, with some shoes   30   6
36.  Piston, used, BSA  slipper type ex Gold star I think, bore 85mm   30   4
37.  Selection of brand new valves specially made to fit a Norton Model 50 head after being modified with larger ports for a racing special. I had to have a batch made and then dropped the project some years ago   70 or split   4
 42.   Thought to be Triumph Tiger 90  rear wheel. with brake  Tyre is 17" x 3.50.  8 bolts holding drum to wheel   15   15
       
       
 43.   Various new spark plugs and a couple of sets of points as used on speedway Weslake engines, or Minis come to that !   6   3
 44.  MAC wheel   20  17.50

 .   Clip-ons, suit 32mm tubes   10   4